Hinged Pushbutton Enclosures (304/316 Stainless Steel)
Description
Hinged Pushbutton Enclosures (304/316 Stainless Steel)
Description: S.S. PB Enclosures
Richards Electric Motor Co. has been designing and fabricating Industrial and Commercial Electrical Control Panels and Automation Systems for a multitude of industries/applications for over 40 years.
Application:
Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt, and oil.
Construction:
- 0.063 In. stainless steel type 304.
- Seams continuously welded and ground smooth.
- Captivated cover screws thread into sealed wells.
- 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches, and pilot lights. Hole diameter is 1.20 in. (30.5 mm)
- Pour in place oil & water-resistant gasket
- Provisions for sub-panel.
- Ground stud on the door.
- Bolt-on continuous hinge with a stainless steel hinge pin.
- Welded mounting provision top and bottom of the back.
Finish:
#4 brushed finish on all exterior surfaces.
Industry Standards
- NEMA Type 3R, 4, 4X, 12 and Type 13
- UL Listed Type 3R, 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
Part Number: SCE-9PBHSS SCE-16PBHSS SCE-9PBHSS6 SCE-12PBHSS6 SCE-9PBHSSI SCE-12PBHSSI SCE-9PBHSS6I SCE-12PBHSS6I
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| # Push Buttons | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 16 |
| Size of Push Buttons | 30.5mm, 22.5mm |
| Stainless Steel |
The above photo is provided for illustrative purposes only. Actual product may vary from image.