Description: Hinged PB Enclosure (30.5mm – 22.5mm)
Richards Electric Motor Co. has been building, designing, and fabricating Industrial and Commercial Electrical Control Panels and Automation Systems for a multitude of industries/applications for over 40 years.
Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt, and oil.
- 0.063 In. carbon steel.
- Continuously welded seams.
- Captivated cover screws thread into sealed wells.
- 4-way standard pushbutton holes accept all brands of oil-tight pushbuttons, switches, and pilot lights. The hole diameter are (22.5 mm – 30.5 mm)
- Bolt-on continuous hinge with a stainless steel hinge pin.
- Provisions for removable subpanel, supported by standoffs.
- Ground stud on the door.
- Pour in place oil & water-resistant gasket
- Welded mounting provision top and bottom of the back.
ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.
- NEMA Type 3R, 4, 12, and Type 13
- UL Listed Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- IEC 60529
- IP 66
Part Number: SCE-4SPBH SCE-6SPBH SCE-9SPBH SCE-12SPBH SCE-16SPBH SCE-4SPBHI SCE-6SPBHI SCE-9SPBHI SCE-12SPBHI SCE-16SPBHI